The size dedicated end form tooling, used in conjunction with the
portable hydraulic power pack, provides for a very quick, easy and precise means of
forming the ends of tube and pipe. This tooling
is dedicated to producing a specific form on a specific diameter of tube. This patented,
compact and lightweight tooling can be brought to the workpiece to be formed. The tooling
is simply placed over the tube and the operator presses the foot switch. The tooling
cycles automatically, producing a finished form in 2 to 5 seconds.
Some of the advantages of this system include:
 | Standard for tube diameters of 1/4” to 1” |
| Rapid operation: 5 seconds or less |
| All pressure loading is contained within the tool |
| Tool can be hand-held (Typical tool for 1” tube weighs less than
5 lbs.) |
| Designed to be used with Model 400 hydraulic power pack |
| Can do expansion, reduction, flare and other shapes |
| Length of end form can be varied within the same tool (By installing internal spacers) |
| Non-standard sizes will be considered |
| No lubrication is required for most applications |
| Simplified tooling |
