| |
Modular Tool End Forming System
The modular tooling is designed to be used with the standard, integrated,
portable power pack while offering the user a wide range of versatility. The
modular heads are mounted on top of the power pack and are available in three sizes to cover tube diameters from
1/8” to 3” OD. By use of individual forming and gripping modules, this system
can be configured to your specific applications. The gripping modules have quick-change
collet sets to accept different tube diameters. The forming modules can be easily
converted to a number of different standard end forms such as expansion, reduction, flare,
bead, etc..
Modular End Form Tooling:
 | 3 module sizes accommodate tube diameters from 1/8” to 3” OD
|
| Rapid operation: 5 seconds or less
|
| All pressure loading is contained within the tool
|
| Equipped with an adjustable form length control
|
| Designed to be used with Model 400 hydraulic power pack
|
| Can do expansion, reduction, flare and other shapes
|
| Compact module design allows pre-bent tubes to be formed
|
| No lubrication is required for most applications
|
| Non-standard and larger sizes will be considered
|
| Simplified tooling
|
An operator can function the system with minimum effort. The operator
places the tube into the modular tooling. When the tube is positioned, pressing the foot
control pedal initiates a cycle. The tooling grips the tube while reciprocating the
forming mandrel. Upon completion, the tooling releases the tube and the system is ready
for another cycle.
 Top of
Page
| |
|
