 |
Pressures to 46,500 PSI (3,200 Bar) |
 |
All stainless steel fitting construction |
 |
Various configurations available |
 |
High Pressure Ratings |
 |
Excellent Flow Characteristics |
 |
Low Volumetric Expansion |
 |
Outstanding Chemical Resistance |
 |
Light Weight |
 |
Resistant to External pressures |
 |
UV and Ozone Resistant |
Type 2 and 3 Series hoses are used for flex lancing, heat exchanger tube cleaning and
supply hose. They are lightweight and flexible with excellent chemical resistance. These
hoses are robust and durable with high burst pressures and are kink resistant. The
inside diameters range from 1/8 to 1 inch (3.175 to 25.40 mm) with working pressures from 5,000 up to
17,500 PSI (345 up to 1,200 Bar).
Type 2K and 2W Series hoses are used for hydraulic tooling, pressure testing, and
offshore umbilical, which are lightweight and flexible with low volumetric expansion and
excellent external pressure resistance. These hoses are also robust and durable with
high burst pressures while at the same time providing the ultimate in kink resistance.
The inside diameters range from 1/8 to 1 inch (3.175 to 25.40 mm) with working pressures from 6,000 up
to 20,000 PSI (415 up to 1,380 Bar).
Type 4 Series hoses are extremely versatile and have been designed for severe service
applications in hydraulics such as bolt tensioning, high-pressure water blasting, and in
the pressure testing industries. The inside diameters range from 1/8 to ¾ inch (3.175 to 19.05 mm) with
working pressures from 14,500 up to 21,000 PSI (1,000 up to 1,450 Bar).
Type 6 and 6K Series hoses offer an outstanding reliability for the toughest and most
extreme pressure applications and are widely used in ultra-high water blasting, jet
cutting, and hydrostatic testing.
Type 6 and 6H hoses have an inner diameter from 1/8 to ¾ inch (3.175 to 19.05 mm) and working pressures from 20,000 up to 40,600 PSI (1,380 up to 2,800 Bar).
Type 8 Series Ultra-high pressure hoses are designed for water jet cutting, hydro
forming, and laboratory operations. Type 8 hoses are available with an inner diameter of
3/16 and 5/16 inch (4.7625 to 7.9375 mm) with working pressures from 40,000 up to 46,500 PSI (2,760 up to 3,200 Bar).
Please specify your application, maximum pressure, media, inner diameter, hose length,
quantities, and required fittings at the end of the hoses.
 |
Chemical Resistance |
To almost all chemicals, including acids and solvents |
 |
Temperature Resistance |
Ranging between -22 degrees F to +176 degrees F (-30.0 to 800 degress C) according to materials |
 |
Weight Savings |
Up to 50% compared with conventional hoses |
 |
Weather Resistance |
Excellent ozone and UV resistance |
 |
Aging Resistance |
Optimal even with frequent change of environmental influences, almost no moisture absorption |
 |
Dimensions |
Favorable ratio between inner diameter and outer diameter, advantageous in space restricted situations |
 |
Dimensional Stability |
Of internal core due to underwater vacuum calibration |
 |
Volumetric Expansion |
Extremely low while under pressure, thus less volume of liquid and faster response time |
 |
External Pressure Collapse |
According to hose type suitable for deep waters on offshore use |
 |
Flow Characteristics |
Minimal friction loss due to smooth inner core |
 |
Assembly |
All hose types crimped directly onto outer core |
 |
Impulse Resistance |
Internal pressure fatigue strength as per DIN 20024/ISO6803 |
 |
Flexibility |
Highly flexible by use of thermoplastic and advanced construction techniques |
 |
Pressure Resistance |
Safety factors of between 4:1 and 2.5:1 for dynamic loading |
 |
Diffusion Resistance |
Minimal diffusion rates for most gaseous media |
 |
Abrasion Resistance |
Outer cover shows value of 50 mm 3 for DIN 53516 |
|
Contact Airmo for your hose needs |