ExpanTek® Model 380 Series Tube Expansion Tools
Pressures Up to 30,000 psi (2,068 bar)
The ExpanTek® Model 380 Series Tube Expansion Tool offers fast, snap-on coupling and positive sealing for high-pressure tube expansion. When used with the ExpanTek® Model HPS Hydrostatic Pressure System, the tool rapidly expands tubing for HVAC applications including boiler and refrigeration coils, and tubular assemblies. The Model 380 Series Tool is suitable for high-pressure expansion of tubes and pipes with standard OD tolerances and maximum working pressure up to 30,000 psi (2,068 bar).
To expand a tube, connect the Model 380 Tool with optional NuQuip® Automatic Air Bleed Valves to the pressure line. Attach the tool to the tube by pressing the handle to retract collets. Push the tube into the tool until pressed against the tube stop. This instantly provides a complete seal. When the handle on the tool is released, the collets are engaged and ready for safe operation. Next apply system pressure to desired level, but do not exceed maximum operating pressure. After the operation cycles and pressure drops to 0 psi/bar, disconnect by pressing the handle to release collets and pull to remove tool.
The Model 380 Series Tool handles standard and metric tube and fitting sizes from 0.38 in. to 1.00 in. OD (9.6 mm to 25.4 mm OD) in diameter.
Contact Airmo for special tool sizes and configurations.
ExpanTek® Model 380 Series Tube Expansion Tools.pdf
ExpanTek® Product Line Card.pdf
The ExpanTek® Model 380 Series Tool is used in many coil and tube expansion applications.
|Model 380 Tool Applications
Boiler coil expansion
Refrigeration coil expansion
ExpanTek® Tube Expansion Tools
ExpanTek® Model 30 Series Tube Expansion Tools - Pressures up to 10,000 psi (689 bar)
ExpanTek® Model 35 Series Tube Expansion Tools - Pressures up to 15,000 psi (1,034 bar)
ExpanTek® Model 37 Series Tube Expansion Tools - Pressures up to 20,000 psi (1,379 bar)
ExpanTek® Model 180 Series Tube Expansion Tools - Pressures up to 10,000 psi (689 bar)
ExpanTek® Model 280 Series Tube Expansion Tools - Pressures up to 20,000 psi (1,379 bar)
NuQuip® High-Pressure Accessories
NuQuip® Automatic Air Bleed Valves - Pressures up to 40,000 psi (2,758 bar)
NuQuip® Model QD Series Quick Disconnects - Pressures up to 60,000 psi (4,137 bar)
ExpanTek® Hydrostatic Pressure Systems
ExpanTek® Model HPS Hydrostatic Pressure Systems - Pressures up to 30,000 psi (2,068 bar)
Top of page
Contact Airmo for Your System and Tool Needs